|
ModelElement Properties |
The ModelElement type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | builder_element | Gets the raw element from where the base data comes. |
 | canBuckle |
Gets a value indicating whether buckling is considered when doing cross section optimization or calculating
the utilization.
|
| color |
Gets or sets the color of the element for some types of rendering. Can be set with a ElemSets-component.
|
| colorIsSet |
Gets a value indicating whether the element has a color attached.
|
| crosec |
Gets or sets the cross section of the model element.
|
| ecce |
Gets the elements eccentricity.
|
| ecce_glo |
Gets the vector of global cross section eccentricity.
|
| ecce_loc |
Gets the vector of local cross section eccentricity.
|
| Elem_loads | Gets the elements loads. |
| fe_id |
Gets the first element index in fe-model. In case of shells there may be more than
one finite element connected to a model element and fe_id points to the shells TriMesh-object.
|
| fe_ind_begin |
Gets the first element index in fe-model. in case of shells there may be more than
one finite element connected to a model element.
|
| fe_ind_end |
Gets the index of element in femodel that lies one entry beyond the last finite element of the model element.
|
| fe_node_ind | Gets the index of fe-nodes of fe-elements in fe-model. Can differ from node_ind in case of joints. |
| hasEccent |
Gets a value indicating whether a cross section has an eccentricity.
|
| id |
Gets the identifier (name) of element.
|
| ind |
Gets the zero-based index of element in model.
The indexes are consecutively numbered from 0 to number of elements.
|
| is_visible |
Gets or sets a value indicating whether the element is visible.
|
| IsActive |
Gets or sets a value indicating whether the element is active. If inactive the element is removed from the
statical model using the soft-kill approach. The FE-model needs to be rebuilt after
manipulating this flag.
|
| nII |
Gets or sets the normal force that induces ThII effects.
|
| node_inds | Gets the index of nodes of elements after assembly. |
| x_ori |
Gets the user defined local x-axis of the element
(not including the additional rotation angle alpha).
|
| x_ori_given |
Gets a value indicating whether a user defined local x-axis is given.
|
| x_ori_list |
Gets the user defined local x-axes of the element
(not including the additional rotation angle alpha).
|
| y_ori |
Gets the user defined local y-axis of the element
(not including the additional rotation angle alpha).
|
| y_ori_given |
Gets a value indicating whether a user defined local z-axis is given.
|
| z_ori |
Gets the user defined local z-axis of the element
(not including the additional rotation angle alpha).
|
| z_ori_given |
Gets a value indicating whether a user defined local z-axis is given.
|
| z_ori_list |
Gets the user defined local z-axes of the element
(not including the additional rotation angle alpha).
|
See Also