|
BuilderElement Properties |
The BuilderElement type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | bending_stiff |
Gets or sets a value indicating whether bending stiffness is taken into account (turns beams into trusses and shells into membranes and vice versa).
|
| canBuckle |
Gets or sets a value indicating whether can buckle.
|
| color |
Gets or sets user defined color of the beam-set.
|
| crosec |
Gets or sets the return cross section of the element.
|
| Ecce |
Gets the nodal eccentricity of the element.
|
| ecce_glo |
Gets or sets eccentricity which is defined in the global coordinate system.
|
| ecce_loc |
Gets or sets eccentricity which is local to the element and can be separately set for each of them.
The other types of eccentricity would be either attached to a cross section or oriented globally.
|
| guid | Gets the the builder's identifier. |
| hasEccent |
Gets a value indicating whether an element eccentricity is present.
|
| id |
Gets or sets the identifier (name) of the element.
|
| ids_secondary |
Gets the secondary identifiers of the element.
|
| is_active |
Gets or sets a value indicating whether the element is active. If not active, the elements stiffness is reduced
to such a degree that it does not influence results any more (soft-kill approach). The small
remaining stiffness should however suffice to keep the system from becoming numerically
kinematic.
|
| is_valid |
Gets a value indicating whether the builder element is valid.
|
| is_visible |
Gets or sets a value indicating whether the element is visible: true if the element is visible on the canvas.
|
| IsValid |
Gets a value indicating whether the element is valid.
|
| modified_height |
Gets or sets the cross section height (depth) modification factor of the this element. Can
be set in a GH definition with the ModifyBeam-component.
|
| modified_thick |
Gets or sets the cross section wall thickness modification factor of the this element. Can
be set in a GH definition with the ModifyBeam-component.
|
| nII |
Gets or sets list of nodal indexes or null.
|
| Ori |
Gets or sets the orientation of the element.
|
| parent_ind |
Gets or sets index of parent element from which this element may inherit its properties
(material, cross section,...)
A negative value signals that there is no parent;.
|
| Pos |
Gets or sets the position of the element.
|
| UserData |
Gets access to the user-data dictionary.
(Inherited from CommonObject.) |
See Also