|
CroSec_Beam Properties |
The CroSec_Beam type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | A | Gets or sets cross sectional area. |
| alpha_lt | Gets or sets the imperfection factors according to EC3 for lateral torsional buckling. |
| alpha_y | Gets or sets the imperfection factors according to EC3 in y-direction. |
| alpha_z | Gets or sets the imperfection factors according to EC3 in z-direction. |
| Ay | Gets or sets equivalent shear Area in local y-direction (normally horizontal) for considering shear deformation. |
| Az | Gets or sets equivalent shear Area in local y-direction (normally horizontal) for considering shear deformation. |
| color |
Gets or sets user defined color of the cross section.
(Inherited from CroSec.) |
| Cw | Gets or sets the second order warping moment. |
| dims |
Gets or sets cross section dimensions.
(Inherited from CroSec.) |
| ecce_loc |
Gets or sets local eccentricity of cross section.
(Inherited from CroSec.) |
| elemIds |
Gets or sets the list of element identifiers to which the cross section is to be attached.
(Inherited from CroSec.) |
| exteriorPerimeter |
Gets outer and inner (where applicable) perimeter associated with the cross section.
(Inherited from CroSec.) |
| family |
Gets or sets the family of the cross section.
(Inherited from CroSec.) |
| familyID |
Gets unique identifier of cross section. Excluded country in order to avoid problems in case of user defined families
which consist of cross sections of different countries.
(Inherited from CroSec.) |
| guid |
Gets gUID of the cross section.
(Inherited from CroSec.) |
| hasEccent |
Gets a value indicating whether the cross section has a locally defined eccentricity.
(Inherited from CroSec.) |
| Ipp | Gets or sets the torsional moment of inertia. |
| IsValid |
Gets a value indicating whether the cross section is valid (has e.g. non-zero area).
(Inherited from CroSec.) |
| iy | Gets the radius of gyration about y-axis. |
| Iyy | Gets or sets the moment of inertia about local Y-axis. |
| iz | Gets the radius of gyration about z-axis. |
| Izz | Gets or sets the moment of inertia about local z-axis (normally vertical). |
| material |
Gets material of the element.
(Overrides CroSecmaterial.) |
| materialName |
Gets name of the basic material attached to the cross section.
(Overrides CroSecmaterialName.) |
| name |
Gets or sets the name of the cross section.
(Inherited from CroSec.) |
| nDims |
Gets number of dimensional.
(Inherited from CroSec.) |
 | nProps |
Gets the number of properties of the cross section.
(Overrides CroSecnProps.) |
| product |
Gets or sets the type of production used for the cross section. This defines the alpha_y/z-values and influences buckling strength.
|
| props |
Gets or sets default cross section properties.
(Overrides CroSecprops.) |
| user_defined |
Gets a value indicating whether indicates whether a cross section is user-defined or generated (e.g. a default material).
(Inherited from CroSec.) |
| UserData |
Gets access to the user-data dictionary.
(Inherited from CommonObject.) |
| Wely_z_neg | Gets or sets the static resistance moment about y-axis for upper cross section point. In case of e.g. T-sections different from Wely_lower. |
| Wely_z_pos | Gets or sets the static resistance moment about y-axis for lower cross section point. |
| Welz_y_neg | Gets or sets the static resistance moment about z-axis for extreme left cross section point. |
| Welz_y_pos | Gets or sets the static resistance moment about z-axis for extreme right cross section point. |
| Wply | Gets or sets the plastic resistance moment about y-axis. |
| Wplz | Gets or sets the plastic resistance moment about z-axis. |
| Wt | Gets or sets the torsional resistance moment. |
| zg | Gets or sets the distance of applied load to shear center of the cross section. By default it is equal to zs. |
| zm |
Gets distance of center of shear from upper section boundary.
(Inherited from CroSec.) |
| zs |
Gets distance of center of gravity from upper section boundary.
(Overrides CroSeczs.) |
See Also